Rle FDS-Wi Quick Start Bedienungsanleitung PDF herunterladen

FDS-Wi Quick Start Guide

hank you for purchasing the Falcon FDS-Wi Wireless Gateway. This

guide describes how to connect the FDS-Wi to the network, configure

inputs and system settings, and set up email notification. The

FDS-Wi User Guide, located on our website, contains additional

installation details.

If you need further assistance, contact RLE Technologies on our website at

http://www.rletech.com/ (go to the Support Link) or by calling

970.484.6510, Option 2.

1Preparing for Installation

When connecting the FDS-Wi to the network, have the following information

available. If necessary, ask your IT administrator to provide this information so

you can assign it to the FDS-Wi.

2Connecting the Wiring

Connect an 18AWG ground wire from the ground terminal to a suitable earth

ground. Plug the wall adapter into P1 and a UPS outlet.

RJ45 Ethernet Connection

The FDS-Wi has an internal 10/100Base-T Ethernet port used to configure the

FDS-Wi. The Ethernet port supports Web browser access, BACnet slave,

Modbus slave, SNMP.

EIA-232 COM Connection

Connect the EIA-232 port to a PC for IP configuration, firmware downloads,

and troubleshooting. The EIA-232 is typically only used as a temporary

connection. Connect the straight through, 9-pin, cable.

Modbus EIA-485 Connections

The FDS-Wi can function as a Modbus Slave over an EIA-485, 2-wire

hardware connection.

3Configuring Network Communication

IMPORTANT Consult your IT administrator before performing these steps.

1 Enter the values for IP Address, Net Mask (subnet mask), and Def Route

(default gateway) provided by your IT administrator.

Once you enter the values and click the Submit Changes button, the

FDS-Wi saves the changes and reboots. The system status LED on front

of the FDS-Wi stops flashing.

IP address

Subnet mask

Default gateway

1 2

Inhaltsverzeichnis

Seite 1 - 2Connecting the Wiring

FDS-Wi Quick Start Guidehank you for purchasing the Falcon FDS-Wi Wireless Gateway. This guide describes how to connect the FDS-Wi to the network, con

Seite 2 - 4Completing the Installation

Kommentare zu diesen Handbüchern

Keine Kommentare

Rle FDS-Wi Quick Start Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Rle FDS-Wi Quick Start herunter. RLE FDS-Wi Quick Start User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Rle FDS-Wi Quick Start