Rle LD2100 V.2.6 Bedienungsanleitung

User GuideLD2100Leak DetectionVersion 2.6Firmware Version 4.1.22

10 LD2100 User Guide 800.518.1519A Update Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

rletech.com LD2100 User Guide 11C HAPTERCHAPTER 0PRODUCT OVERVIEW1.1. DescriptionThe LD2100 is a complete monitoring system that reports the presence

12 LD2100 User Guide 800.518.15191 Product Overview1.2. OperationSupervised SystemThe LD2100 is a supervised system — it continually monitors the lea

rletech.com LD2100 User Guide 13C HAPTERCHAPTER 1INSTALLATIONInstalling the LD2100 involves mounting it to a wall in the appropriate location and maki

14 LD2100 User Guide 800.518.15192 Installation2.2. Controls and DisplaysThe front of the LD2100 contains the following controls and displays:Item D

rletech.com LD2100 User Guide 152 Installation2.3. Physical ConnectionsThe LD2100 has the following physical connections:Figure 2.1LD2100 Connections

16 LD2100 User Guide 800.518.15192 InstallationThe three contacts on TB3 are labeled NO, C, and NC. Connect the alarm relay wires to TB3 as follows:T

rletech.com LD2100 User Guide 172 Installation2.5. Connect the SeaHawk Leak Detection CableThe LD2100 is shipped with a 15-foot (4.57m) leader cable

18 LD2100 User Guide 800.518.15192 InstallationNote If the EOL terminator is not present at the end of the cable run, a cable fault will register.6If

rletech.com LD2100 User Guide 192 Installation2.6. Apply Power to the LD2100An isolated power supply must be provided for the LD2100. In addition, a

2 LD2100 User Guide 800.518.1519Copyright and Trademark Notices© Raymond & Lae Engineering, Inc. 2011. All rights reserved. RLE® is a registered t

20 LD2100 User Guide 800.518.15192 Installation2.7. Configure Communication through the Ethernet PortIMPORTANT Consult your IT administrator before

rletech.com LD2100 User Guide 212 Installation2.7.2 Configure Network CommunicationsTo configure network communication, set the IP address for the L

22 LD2100 User Guide 800.518.15192 InstallationIf the login window for the LD2100 does not display:a Verify that all cables are firmly attached.b Ver

rletech.com LD2100 User Guide 232 Installation2.9. Calibrate Cable ResistanceDistance-read leak detection systems are resistance-based. RLE’s orange

24 LD2100 User Guide 800.518.15192 InstallationFor example:One 15 foot leader cable (leader cable does not count toward the total length of cable ins

rletech.com LD2100 User Guide 252 Installation2.10. Test the SystemNow that the system is calibrated, test a few spots before mapping the system.Not

26 LD2100 User Guide 800.518.15192 Installation

rletech.com LD2100 User Guide 27C HAPTERCHAPTER 2WEB INTERFACEUse the LD2100’s web interface to configure and monitor the status of the system. To acc

28 LD2100 User Guide 800.518.15193 Web Interface3.2 IdentityThe Identity link displays basic LD2100 information, including model number, system name,

rletech.com LD2100 User Guide 293 Web Interface3.3 ConfigurationThe Configuration link provides access to a series of sub-menus from which users can

rletech.com LD2100 User Guide 3Product RegistrationProduct registration helps RLE Technologies inform owners of:• Product upgrades• Firmware enhanceme

30 LD2100 User Guide 800.518.15193 Web Interface3.3.1 Leak SettingsUse the Leak Configuration page to fine tune system variables, including leak and

rletech.com LD2100 User Guide 313 Web InterfaceLeak Alarm Delay The amount of time that passes between the time a leak is detected and the annunciati

32 LD2100 User Guide 800.518.15193 Web InterfaceSet Cable Relay Button - Used to troubleshoot the controller, this button simulates 8060 ohms of leak

rletech.com LD2100 User Guide 333 Web Interface3.3.2 Zone SettingsYou can set up the LD2100 to identify different areas where leak detection cable or

34 LD2100 User Guide 800.518.15193 Web Interface3.3.3 Virtual Zone SettingsOnce you’ve designated how many virtual zones you’d like to have, you nee

rletech.com LD2100 User Guide 353 Web Interface3.3.5 Zone Link/URL SettingsIf you’ve connected slave devices to the LD2100, you may want access to ad

36 LD2100 User Guide 800.518.15193 Web Interface3.3.6 Network SettingsThe Network/IP page displays the assigned MAC address and allows users to confi

rletech.com LD2100 User Guide 373 Web Interface3.3.7 Web/Map SettingsUse this page to establish passwords and a username for the web interface, to cu

38 LD2100 User Guide 800.518.15193 Web Interface3.3.7.1 Working with a Reference MapThe LD2100 allows users to upload up to 2 maps of their faciliti

rletech.com LD2100 User Guide 393 Web InterfaceDo not attempt to map your facility until your monitoring area is completely assembled - all of your l

4 LD2100 User Guide 800.518.1519RLE Product WarrantySeller warrants to the Ultimate Purchaser (the purchaser who buys for use and not for resale) that

40 LD2100 User Guide 800.518.15193 Web InterfaceDelete an ImageIf you uploaded a map or other image that you decide not to use, and you aren’t planni

rletech.com LD2100 User Guide 413 Web Interface2 Select the Yes radio button for Floor Map #1 Interactive.3 Click the Map Alarm Coordinates - Graphic

42 LD2100 User Guide 800.518.15193 Web InterfaceWhen a leak occurs, its location will be shown on the map.Figure 3.14Map with Location of Leak ShownV

rletech.com LD2100 User Guide 433 Web Interface3.3.8 ClockUse this link to adjust the date and time as needed. Click the Submit Changes button to sav

44 LD2100 User Guide 800.518.15193 Web Interface3.3.9 NTP (Network Time Protocol)NTP, or Network Time Protocol, is used to synchronize clocks of com

rletech.com LD2100 User Guide 453 Web Interface3.3.10 Email-SMTP/DNSConfigure email and SMTP setting through this page.Figure 3.18E-mail Configuratio

46 LD2100 User Guide 800.518.15193 Web InterfaceSecondary DNS ServerEnter the IP address for the secondary DNS server, as provided by your internet s

rletech.com LD2100 User Guide 473 Web Interface3.3.11 SNMP/SyslogYou can configure the LD2100 for SNMP communications, including setting SNMP traps.F

48 LD2100 User Guide 800.518.15193 Web InterfaceMax Inform Retries The number of times the LD2100 will attempt to resend an undelivered trap. Enter a

rletech.com LD2100 User Guide 493 Web Interface3.3.12 EIA-485 Port/Modbus/N2Note If you want to configure the LD2100 as a Modbus Master, follow the i

Contentsrletech.com LD2100 User Guide 51 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 LD2100 User Guide 800.518.15193 Web InterfaceFigure 3.21LCD-240 ConfigurationLCD Options A small number of companies connect an aftermarket LCD to

rletech.com LD2100 User Guide 513 Web Interface3.3.13 BacnetThe LD2100 can be configured as a BACnet slave if you would like to tie it into an existi

52 LD2100 User Guide 800.518.15193 Web InterfaceOption DescriptionBACnet Device NameDesignate a unique name for the LD2100, up to 30 charactersBACnet

rletech.com LD2100 User Guide 533 Web Interface3.3.14 Alarm ManagementUse this page to manage and reset current alarms, messages, and alarm history.F

54 LD2100 User Guide 800.518.15193 Web Interface3.3.15 System/Flash ManagementUse this page to update the LD2100’s firmware, to upload maps, and to b

rletech.com LD2100 User Guide 553 Web Interface3.4. Historical DataThe Historical Data link provides access to logged historical data, including alar

56 LD2100 User Guide 800.518.15193 Web InterfaceAlarm history data is also available as a text file (.txt.). Click the AlarmHistory.txt or AlarmHistr

rletech.com LD2100 User Guide 573 Web Interface3.5. Save your ConfigurationAfter you have configured the LD2100, save a backup of the configuration

58 LD2100 User Guide 800.518.15193 Web InterfaceSave the Map ImageThe map image is the only item that doesn’t get backed up when you save the LD2100’

rletech.com LD2100 User Guide 593 Web Interface4 Give the image file a name. The file extension is provided for you, based on the file type of the ma

6 LD2100 User Guide 800.518.15195 Modbus Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Imp

60 LD2100 User Guide 800.518.15193 Web Interface

rletech.com LD2100 User Guide 61C HAPTERCHAPTER 3CONFIGURE THE LD2100 AS A MODBUSMASTERThe LD2100 can act as a Modbus master to other RLE distance-rea

62 LD2100 User Guide 800.518.1519 4.2. Connect Distance-Read Panels Through the Ethernet PortWhen using the LD2100 as a Modbus master, the slave unit

rletech.com LD2100 User Guide 63 4.3. Configure Modbus CommunicationsLog into the LD2100 web interface and configure the unit to be a Modbus master:1

64 LD2100 User Guide 800.518.1519 4 For labeling Modbus/Physical zones, select Physical Zone Settings from the Configuration Menu. Figure 4.5Modbus/P

rletech.com LD2100 User Guide 65 Figure 4.6LD2100 Home Page Showing Modbus Slaves8View the individual slave unit information by clicking on the Zone

66 LD2100 User Guide 800.518.1519

rletech.com LD2100 User Guide 67C HAPTERCHAPTER 4MODBUS COMMUNICATIONThis chapter describes the Modbus communication protocol as supported by the LD21

68 LD2100 User Guide 800.518.15195 Modbus Communication5.1.1.2 Function FieldThe function field is one byte in length and tells the LD2100 which func

rletech.com LD2100 User Guide 695 Modbus Communication5.2. Packet Communications for the LD2100This section covers the registers with the name and a

Figuresrletech.com LD2100 User Guide 71 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70 LD2100 User Guide 800.518.15195 Modbus Communication5.2.2 Function 04: Read Input RegistersTo read the LD2100 input values, the master must send

rletech.com LD2100 User Guide 715 Modbus Communication30009 Version Firmware version xx.xx X 100 0-6553530010 Virtual Zone Alarm StatusBit Level Stat

72 LD2100 User Guide 800.518.15195 Modbus Communication30040 Modbus Zone16 Status Bit Level Status None 0-6553530041 Modbus Zone16 DistanceLocation o

rletech.com LD2100 User Guide 735 Modbus Communication30066 Modbus Zone28 DistanceLocation of leak Ft/Meters 0-6553530067 Modbus Zone29 Status Bit Le

74 LD2100 User Guide 800.518.15195 Modbus CommunicationTable 5.7Status Flags (Register 30010)Bit Description00 1 = Zone101 1 = Zone202 1 = Zone303 1

rletech.com LD2100 User Guide 755 Modbus CommunicationTable 5.8Status Flags (Register 30011)Bit Description00 1 = Not enabled01 1 = Enabled, b1=MBZ20

76 LD2100 User Guide 800.518.15195 Modbus CommunicationTable 5.10Status Flags (Register 30042)Bit Description00 1 = MBZ1701 1 = MBZ1802 1 = MBZ1903 1

rletech.com LD2100 User Guide 775 Modbus CommunicationTable 5.11Status Flags (Register 30075)Bit Description00 1 = Zone1701 1 = Zone1802 1 = Zone1903

78 LD2100 User Guide 800.518.15195 Modbus Communication5.2.3 Function 06: Preset Single RegisterTo set a LD2100 parameter value, the master must sen

rletech.com LD2100 User Guide 795 Modbus Communication5.3. RTU FramingThe example below shows a typical Query/Response from an LD2100 module.Slave ad

8 LD2100 User Guide 800.518.1519Figure 3.28 System Management Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Figu

80 LD2100 User Guide 800.518.15195 Modbus Communication

rletech.com LD2100 User Guide 81C HAPTERCH APTER 5PREVENTIVE MAINTENANCEFollow these steps monthly to test the system and ensure that the control pane

82 LD2100 User Guide 800.518.15196 Preventive Maintenance

rletech.com LD2100 User Guide 83C HAPTERCHAPTER 5TROUBLESHOOTINGProblem ActionControl Panel will not Power Up1 Check with a DVOM (multi-meter) for AC

84 LD2100 User Guide 800.518.15197 TroubleshootingNote Contamination and/or physical damage to the cable is not covered under warranty. For all other

rletech.com LD2100 User Guide 857 Troubleshooting7.1. Restoring Factory DefaultsOn rare occasions, you might need to set the LD2100’s configuration t

86 LD2100 User Guide 800.518.15197 Troubleshooting

rletech.com LD2100 User Guide 87A PPENDIXCHAPTER 0UPDATE FIRMWAREFirmware updates are available on the Resources page of the RLE Web site at www.rlete

88 LD2100 User Guide 800.518.1519A Update FirmwareA.2. Loading Flash Firmware Using MIMETo use MIME to load the firmware:1On the LD2100 interface, g

rletech.com LD2100 User Guide 89A Update FirmwareThe firmware is loaded while the LD2100 displays a message confirming that it is loading the new fil

Tablesrletech.com LD2100 User Guide 91 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90 LD2100 User Guide 800.518.1519A Update FirmwareA.3. Loading Flash Firmware Using TFTPBefore updating the firmware, the firmware flash application

rletech.com LD2100 User Guide 91A PPENDIXCHAPTER 0TECHNICAL SPECIFICATIONSTable B.1Technical SpecificationsPower 24VAC isolated @ 600mA max, 50/60Hz;

92 LD2100 User Guide 800.518.1519B Technical SpecificationsSMTP (Email) Supports Client Authentication (plain and login); compatible with ESMTP Serve